Placa Mãe Intel 8ª e 9ª Geração LGA 1151 Z390 UD RGB INTEL® 9MZ39UD-00-10 GIGABYTE

Specifications:
CPU:
– Support for 9th and 8th Generation Intel® Core i9 processors/Intel® Core i7 processors/Intel® Core i5 processors/Intel® Core i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1151 package
– L3 cache varies with CPU

Chipset:
– Intel® Z390 Express Chipset

Memory:
– 4 x DDR4 DIMM sockets supporting up to 128GB (32GB single DIMM capacity) of system memory**
** Please note that the support for system total memory size depends on the CPU installed.
– Dual channel memory architecture
– Support for DDR4 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz memory modules
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics:
Integrated Graphics Processor-Intel® HD Graphics support:
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz
* Support for HDMI 1.4 version and HDCP 2.2.
Maximum shared memory of 1 GB
Actual support may vary by CPU.

Audio:
– Realtek® ALC887 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
– Support for S/PDIF Out

LAN:
– Realtek® GbE LAN chip (10/100/1000 Mbit)

Expansion Slots:
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– 2 x PCI Express x16 slots, running at x4 (PCIEX4_1/PCIEX4_2)
– 3 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics Technology:
– Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies

Storage Interface:
Chipset:
– 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support)
– 6 x SATA 6Gb/s connectors
– Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.
Intel® Optane Memory Ready

USB:
Chipset:
– 8 x USB 3.1 Gen 1 ports (6 ports on the back panel, 2 ports available through the internal USB header)
– 2 x USB 2.0/1.1 ports available through the internal USB header

Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x 4-pin ATX 12V power connector
– 1 x M.2 Socket 3 connector
– 6 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 3 x system fan headers
– 1 x RGB LED strip header
– 1 x front panel header
– 1 x front panel audio header
– 1 x USB 3.1 Gen 1 header
– 1 x USB 2.0/1.1 header
– 1 x S/PDIF Out header
– 1 x Thunderbolt add-in card connector
– 1 x Trusted Platform Module (TPM) header (2×6 pin, for the GC-TPM2.0_S module only)
– 1 x serial port header
– 1 x Clear CMOS jumper

Back Panel Connectors:
– 1 x PS/2 mouse port
– 1 x PS/2 Keyboard port
– 1 x HDMI port
– 6 x USB 3.1 Gen 1 ports
– 1 x RJ-45 port
– 3 x audio jacks

I/O Controller:
– iTE® I/O Controller Chip

H/W Monitoring:
– Voltage detection
– Temperature detection
– Fan speed detection
– Overheating warning
– Fan fail warning
– Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.

BIOS:
– 1 x 128 Mbit flash
– Use of licensed AMI UEFI BIOS
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0